Mobile ADAS calibration at a glance
An on-site, mobile visit suits some calibrations and not others. The method each sensor takes decides which.
-
Price
Per system, from $240. A mobile visit costs what the same job costs in a service center bay.
-
Coverage
Nationwide. Each job goes to the service center or mobile technician that covers your ZIP code. Find yours by ZIP.
-
Booking
Send the VIN and the repair. The quote shows the price and where the job happens, and then you decide.
Mobile visit or shop bay?
You don't need to work it out. We check what your car's maker sets for each sensor.
- Road drive (dynamic): your sensor re-aims on a drive, so it can be done as a mobile visit.
- Targets (static): your car needs a level, lit, measured space, and the maker's instructions decide where.
Either way, the job follows the maker's documented steps. Send your VIN and we'll tell you which.
Prices, mobile or in a bay
The same price applies mobile or in a bay, except rows marked Shop bay only. The full price card lists every system.
Calibration, per system
Coding a replaced part to your vehicle
Diagnostic scan
- Same price on a mobile visit, except rows marked Shop bay only.
- Prices are before sales tax. Whether labor is taxed depends on your state; any tax that applies is itemized on your written quote.
- Dynamic calibration runs on the road, so it can be done as a mobile visit. Static calibration needs a level, lit, measured space, so whether your job can be done mobile depends on what your car's documented procedure calls for.
- Rows marked Shop bay only are done in a shop bay. The bay-and-road camera price applies when your car needs both calibrations.
Which calibrations can be a mobile visit?
Know which part the shop replaced or moved? Each one is calibrated its own way.
-
Windshield camera
New glass? Many cameras re-aim on a road drive, so the job can be done as a mobile visit. Some need targets instead.
-
Front radar
Bumper or grille work? Some radars re-aim on a drive. Others need a target or a hand adjustment first.
-
Blind spot radar
Rear bumper repaired? On GM cars these relearn as you drive. Some other makes check them against targets at the rear corners.
-
Backup camera
Tailgate or camera replaced? Some realign on a drive. Others align against targets behind the car.
-
Surround view camera
Mirror, bumper or camera work? We quote this one for a shop bay, usually with mats laid around the parked car.
What decides it for your car
The repair order lists the parts the shop removed or replaced. With your VIN, it shows which method each sensor takes.
When a sensor needs nothing
GM blind spot sensors relearn as you drive. A new Ford front bumper cover needs no front radar routine if the radar wasn't moved.
But parking sensors, cameras and corner radars in that bumper still get their own check. The repair order shows which were touched.
Far from a service center?
Fill out the quote form anyway. Your quote names who takes the job on, and says plainly when the work needs a bay.
What helps us quote it
- The repair order: from the glass shop or body shop.
- The dash: any warning, word for word.
- A replaced sensor: whether it's new or used.
Booking for a body shop or glass shop? Check the shop box on the form. Trade calibration explains how shop jobs run.
Know your calibration method
The detail behind your quote, from the makers' own documents. New to calibration? Start with what it is and how it works.
A road drive needs the right road. The sensor aims itself as it goes, so the route matters.
On GM cars, the drive goes best with:
- a divided highway, lane lines on both sides
- a steady 35 to 56 mph
- cars ahead and roadside signs, for the radar
What can stall it:
- heavy or stop-and-go traffic, or none at all
- faded or missing lane lines
- a dirty or cracked windshield
Target work needs a floor level under all four tires. Honda's job aid says to "avoid doing it outside."
A target bay also needs:
- even light, "such as inside the shop"
- room for each target at its set distance
- no metal garage doors, shutters or floor grates nearby
- nothing bright behind or in front of the targets, such as a window
A parking lot or sloped floor won't do. It needs a bay, ours or the repair shop's.
Each maker sets its own method per sensor. Send your VIN, and we'll look up yours.
| Make | Sensor | Method |
|---|---|---|
| Honda | Camera, 2022 to 2023 Civic, 2023 CR-V and Pilot | Static or dynamic |
| Honda | Camera, 2013 to 2015 Crosstour, 2014 to 2015 Odyssey | Dynamic only |
| Honda | Camera, some later models | Static only |
| Chevrolet and other GM brands | Windshield camera, front radar, blind spot sensors | Learned on a drive |
| Ford | Windshield camera, corner radars | Drive routine |
| Ford | Head-up display, after new glass | Static check |
| Ford | Front radar, moved or replaced | Hand adjustment, then a drive |
| Ford | Front radar, untouched under a new front bumper cover | No routine |
| Ford | Parking sensors | Static, in the shop |
| Subaru | Camera, 2015 to 2016 Legacy and Outback, after new glass | Both: adjustment parked, then a drive |
Sources: Honda job aid, August 2025; Ford job aid, September 2026; GM job aid, June 2021; Subaru bulletin, October 2015.
Weather affects the two methods differently. A road drive needs lane lines the camera can read.
Honda's job aid lists conditions that upset a drive, among them:
- "Driving on a snowy or wet roadway"
- "Driving into low sunlight (at dawn or dusk)"
- "Driving on curvy, winding, or undulating roads"
Indoors, weather doesn't hold up target work. A snow-covered car just needs to drip dry first.
Mobile calibration questions
No. Where a job has a mobile price, it costs the same either way. A front camera calibration on a mobile visit is $300.
Two jobs have no mobile price. A camera needing both methods is $500, and surround view is $335, both in a shop bay.
A diagnostic scan, when your job needs one, is priced and itemized separately.
Often, when your car's maker sets a road drive for it. GM and Ford windshield cameras take one.
If it's aimed at targets instead, it needs a level, lit, measured space. That can be our bay or the repairing shop's.
A front camera calibration is $300 on a mobile visit.
Usually, yes, it drives normally. But until the sensor is re-aimed, lane keeping and automatic braking can't be trusted.
They may miss things, or warn and brake when they shouldn't. Drive as if they weren't there, and keep your own distance.
Some makers want the calibration done before the car leaves the repair shop. If the job needs a bay, drive there the same way.
Your quote names where the job happens. Each job goes to the service center or mobile technician that covers your ZIP code.
For a glass shop or body shop job, that can be the shop's own bay.
A road drive needs dry roads and clear lane lines. Snow or fog moves it to another day.
Then the technician tells you what stopped it. It can be:
- the road or the weather
- aftermarket glass
- a bent bracket
- a stored fault
Some of those need a repair first, some a bay. You get the next step and its price before anything else is scheduled.
Check your policy before the work. Your insurer, your state and the kind of claim, glass or collision, all decide it.
Each system has its own price on the quote, ready to hand to your adjuster.
Find out if your calibration can be a mobile visit
Send your VIN and the parts that were replaced. Your quote is confirmed in writing before anything is scheduled.
Updated